ISC logo
Intex Systems text


Several Reasons Why You need a Ground Piercing Pinpointer:

Metal detectors are notorious for poor pinpointing.

Pin pointing the object before you dig means a smaller hole is needed because you know exactly where and how deep the coin or other valuable is located. Less time and less mess.

Once you dig a hole, the soil is disturbed and you are more than likely to lose any coins that are laying close by.

This pinpointer can then be used to scan through the loose soil from your dig.


Pinpointer Features:

(1) Ground piercing pinpointer probe.

(2) Wear resistant & waterproof probe assembly.

(3) Microprocessor controlled circuitry.

(4) Audio "Ferrous" indentification selection mode.

(5) Five Bright green LEDs signal indicators.

(6) LEDs also serves as Battery status.

(7) Easy access 9 volt battery compartment.

(8) Automatically Powers Off after period of inactivity.

(9) Probe length = 8" overall

(10) Control Panel: Push button operation


Metal Detection Search Field:

The Cache Pro Elite is an electronic metal detector in the physical form of a pinpointing probe allowing the user to location the buried object prior to digging or after digging as well. The metal sensing field is basically cylindrical in shape around the white wear resistant tip. The miniature metal detection coil assembly inside creates this magnetic field that influenced by metal and electronically converted into both an audio tone change and visual LED bar graph signal indication.

Larger objects will to detected at the greater distances, while smaller objects will yield less range in the same manner as your prinary metal detector.



soil probing



Why use a Ground Piercing Pinpointer?

(1) After the soil is disturbed from digging, the metal object is more difficult to find and in some cases lost. When you know exactly where the object is before you dig, you can retrieve it with less digging and disruption of the soil. More environmentally.

(2) You are less likely to damage a valuable find because you won't strike it with your digging tool. A valuable coin or ring when struck by your digging tool, means lost value.


The Pinpointer is designed to allow you to pierce the soil and locate the exact loaction and depth of the coin, ring, or other valuable finds without the need to dig first.

Other pinpointers require digging a big hole first, then stiffing through a pile of soil. If nothing is found, then the hole must be enlarged and repeat the entire process. The CachePro-Elite eliminates all of this wasted time.

Use your primary metal detector finds the general location of a buried object. The Cache Pro Elite pinpoints the exact location and depth. Simply grab the shaft at the surface level and when you rettact the probe, you know the exact loaction and depth.

Operation: As the Probe Tip approaches the metal target, the audio sounder begins and the LEDs start to light in sequence. As the probe tip gets closer, the audio tone rises in frequency and LEDS continue to light in sequence. Ferrous metal will produce a "broken" tone or decrease in tone frequency, depending on the Mode you selected.